Nowadays, homeowners want to modernise their living spaces in such a way that they have to spend little or no time on their maintenance.
When it comes to the home lawns, laying TK Turf is their ultimate choice. However, where professional finishing looks enchanting, people want to save money on the installation of artificial grass too. Lying on artificial turf is not as easy as it sounds but with the perfect tools and our beginner’s guide from this blog post, you will have a good start with your DIY projects. Let’s dive in for more.
Why You Should Prefer Artificial Turf
Artificial grass is a tempting option for those who do not want to go with the typical lawn-associated tasks like watering, mowing, fertilising, etc. When you install the artificial turf, there is no more sweating about this overwhelming routine as only an occasional cleaning with water can renew its appearance. You choose the right blade height according to the human traffic expected and the lawn is going to survive on its own for years.
Apart from the durability, fake grass looks realistic and works like magic to enhance the curb appeal of your home. The antimicrobial property and allergen-free nature of turf is an additional perk for creating a safe outdoor living space for your family. Do not hesitate with this decision and get started to install this timeless addition to your home.
Step-By-Step Guide to Lay Down Artificial Turf
If you are looking for a balanced and well-levelled surface with artificial turf, below is a step-wise instruction from the professional to perfectly place the turf and create a lush lawn.
⦁ Take Measurements
Before installation, you need to measure the area where you are planning to install the turf. Measure the length and width from the longest side if it's uneven and check with your providers for the length of the artificial grass carpets they are providing. Choose and plan to lay down the carpet according to the taken measurements, so it will cover the entire surface appropriately.
⦁ Procure Your Tools
To install the artificial turf like a pro, you need to procure professional tools. You can rent it or get your own for future DIY projects. Here is the list of the common items you are going to need.
⦁ Turf cutter and Stanley Knife
⦁ Measuring tape
⦁ Adhesive tape and glue
⦁ Hammer and Ground pins
⦁ Compacting rollers
⦁ Levelling Tools
⦁ Sharp Sand
⦁ Weed Membrane
⦁ Remove Existing Turf
If the lawn area was already covered with the turf, get the mechanical turf cutter to remove it completely. Moreover, if the natural grass is covering the surface or there is soil or debris you need to remove, use spades or garden forks to pluck out everything leaving a neat and clean space to proceed with your DIY project.
⦁ Level and Compact the Ground
Once the existing landscaping is removed, you will see several bumps on the ground that will be troublesome for the perfect placement of the artificial grass. Get the levelling tools to move the soil around creating a levelled surface. Now, use the compaction rollers to compact the soil until you get a balanced surface to lay down the carpet of artificial turf.
⦁ Lay Down the Weeding Membrane
Weeding is a major issue with the home lawns which destroy the entire appearance of your garden leaving a barren and destructed garden behind. You will never want this issue with the lush garden you just created with a significant investment. Lay down the geotextile membrane to suppress the growth of the weed and keep your garden safe.
⦁ Prepare the Ground
Now it is the time to lay the sub-base for the artificial turf. On the compacted soil, place at least 40 mm of sharp sand or aggregated stones to cover the entire surface. Again, use the levelling tools and compaction rollers to create an even surface. Now arrange the cement borders on the edges to fasten the carpet after you lay it. While you are preparing your soil, let the grass lay open to ease its creases under the sun.
⦁ Lay Down the Turf Carpet
Lay down the artificial turf carpet on the levelled surface and use a roller to lay it down perfectly removing the remaining creases. Once you have laid it down, use the Stanley knife to trim the additional length but do not throw the cutting right away as you may need them to fill the holes or empty spaces at the end. Secure the adjacent carpets with tape and glue.
The Verdict
Laying down the artificial grass becomes easy with the above guide and procuring the right tools. Follow the above instructions to get the desired outcomes. However, if there is still any confusion left with choosing the right turf or its installation, book your consultation with the astroturf installation company for professional assistance.